Temperature Sensors for Laboratory
and Portable Meters
|
|
|
 |
| Description |
The standard TPS Temperature sensor is
made of 316 stainless steel with a nylon handle. It is suitable for
most Laboratory and Portable instruments when supplied with the
correct connector for the instrument being used. |
| Temperature
Range |
-45 to 120 OC (-49 to 248 OF) |
| Sensor Type |
Various types, depending on instrument
with which sensor will be used. |
| Dimensions |
105 x 6.35 mm |
| Ordering |
| Description |
Part No |
| Current
Meter Models |
|
| Sensor with 1m cable for pH Cube,
901 Series, 900 Series, and late model 1852-MV (1 pin plug) |
121245 |
| Sensor with 1m cable for Aqua and
WP Series |
121247 |
| Sensor with 1m cable for labCHEM
and smartCHEM Series |
121248 |
| Sensor with 1m cable for WP82Y,
WP91 & Aqua-DY (can only be used if
Dissolved Oxygen sensor is not connected) |
121253 |
| Sensor with 5m cable for 90 Series |
124210 |
| Extra cable (order by the metre) |
130040 |
|
Obsolete Meter Models |
|
| Sensor with 1m cable for early 1852
Series meters, 2 pin plug (used for ATC only,
does not provided Temperature readout.) |
121246 |
| Sensor with 1m cable for early TPS
pH meters, 3 pin plug (used for ATC only, does
not provided Temperature readout.) |
121260 |
| Sensor with 1m cable for LC80-A,
803, 804, MC-80, LC84 & 2100 |
121265 |
| Sensor with 1m cable for 440 and
early LC80 (used for ATC only, does not
provided Temperature readout.) |
121266 |
| Sensor with 1m cable for 2102A (used
for ATC only, does not provided Temperature readout.) |
122228 |
| Sensor with 1m cable for 440 and
LC87S |
124200 |
|
|
|
|
|
|
 |
| Description |
For use in applications such as abattoirs,
cheeses and others, where the sensor needs to be pushed into
semi-solid products. The cable runs out of the side of the sensor,
allowing the user to push on the rear to insert it into the test
product without causing cable damage. A sharp tip is also provided. |
| Temperature
Range |
-45 to 120 OC (-49 to 248 OF) |
| Sensor Type |
Various types, depending on instrument
with which sensor will be used. |
| Dimensions |
105 x 6.35 mm |
| Ordering |
| Description |
Part No |
| Sensor with 2m cable for WP and
Aqua Series (can also be supplied with
connector to suit other TPS instruments on request) |
121249 |
| Extra cable (order by the metre) |
130040 |
|
|
|
|
|
|
| Description |
TPS can manufacture a WP or AQUA series
temperature sensor to suit specific applications. Please use our Feedback
page to make an enquiry. |
| Ordering |
| Description |
Part No |
| Custom Temperature sensor (supplied with
WP or AQUA series plug). |
124207 |
|
|
|
|
|
|
 |
| Description |
Narrow diameter body for fast response in
liquids and semi-solids. |
| Temperature
Range |
-40 to 750 OC |
| Dimensions |
120 x 3.2 mm |
| Ordering |
| Description |
Part No |
| Sensor with 1m cable with Type K
mini-plug |
124204 |
|
|
|
|
|
|
 |
| Description |
Designed for faster response in Air/Gas
measurements, this sensor has the thermocouple wires twisted at the
tip. Not suitable for measurements in liquids. |
| Temperature
Range |
-10 to 50 OC |
| Dimensions |
1 m x 1.8 mm (cable dimension) |
| Ordering |
| Description |
Part No |
| Sensor with 1m cable with Type K
mini-plug |
124205 |
|
|
|
|
|
|
 |
| Description |
This Type K thermocouple sensor is
designed to push squarely onto a flat surface. It is slightly spring
loaded to provide a positive feel when the sensor is correctly
positioned against the surface being measured. |
| Temperature
Range |
-10 to 400 OC |
| Dimensions |
15 x 15 mm diameter (sensing tip only)
Complete sensor is 90mm long. |
| Ordering |
| Description |
Part No |
| Sensor with 1m cable with Type K
mini-plug |
124205 |
|
|
|
|
|
|
| Description |
TPS can manufacture Type K thermocouple
sensor to suit specific applications. Please use our Feedback
page to make an enquiry. |
| Ordering |
| Description |
Part No |
| Custom Type K Thermocouple sensor
(normally supplied with Type K mini-plug) |
124206 |
|
|
|
|
|
|
 |
| Description |
Stab type temperature sensor with narrow
3mm diameter body and pointed tip. The thin-walled stainless steel
provides fast temperature response, but is suitable only for
insertion into soft products. |
| Temperature
Range |
-45 to 120 OC |
| Dimensions |
95 x 3 mm diameter |
| Ordering |
| Description |
Part No |
| Sensor with 1m cable for WP and
Aqua Series (can also be supplied with
connector to suit other TPS instruments on request) |
124220 |
| Extra cable (order by the metre) |
130040 |
|
|
|
|
|
|
 |
| Description |
This sensor is used primarily by bark and
mulch suppliers to measure the temperature deep inside compost
piles. It features a heavy duty 16mm diameter body, with a thick
"sword" type handle. |
| Temperature
Range |
-10 to 120 OC |
| Dimensions |
16mm diameter
Length to suit customer's requirements, 1.5m max. |
| Ordering |
| Description |
Part No |
| Sensor with 2m cable for WP and
Aqua Series (can also be supplied with
connector to suit other TPS instruments on request) |
114202 |
| Extra cable (order by the metre) |
130040 |
|
|
|
|
Download this Specification Sheet in PDF format.
Hint : Right click on a link, then
select "Save Target As..." or "Save Link
As..." to save the file to your own computer.
If you do not have Adobe Acrobat in your computer, a free Acrobat
Reader can be downloaded by clicking on the following link.
|
TPS reserves the right to change any part
of this specification without notice.
Version 1.0
Copyright © 2003 T.P.S. Pty Ltd |
