Nothing's as cool, as a freshwater pool™
easyCHEM 110 Chemical Feeder for Pools and Spas
with Timer Output for Pool Pump
|
|
Full Size Image
Illustration of Typical Full
Installation
|
 | Chorine or Acid feeder
for Swimming and Spa Pools.
Inbuilt peristaltic pump makes installation a breeze.
|
| Supplied with
Temperature sensor and all accessories required for installation
and operation.
|
| Fast and easy to
install.
|
| Water resistant to
IP25.
|
| Easy to use.
|
| Designed for domestic
and small commercial pool installations.
|
| To see how quick and
easy the easyCHEM 110 is to install, ask for a copy of the
installation guide. |
|
|
|
Features
|
Benefits
|
| Temperature
Readout |
| Digital readout of pool temperature to 0.2 OC
. |
User is able to see the temperature of the pool
at a glance without having to purchase extra Temperature
instrumentation. |
Smart-Temp Function |
|
Adds extra chemical when temperature is higher than pre-set value.
Adds less chemical when temperature is lower than pre-set value. |
In times of hot weather, Chlorine breaks down
more rapidly and bather loads increase. The Smart-Temp function will
automatically add more Chlorine or Acid to compensate for this when the
temperature rises above a pre-set level. The user is able to set this
level, and also the amount of extra chemical to add. The reverse also
applies to cold weather.
The high and low temperature thresholds and percent increase and
decrease amounts can be independently set. |
Pool
Pump Timer Output |
| Pump Timer controls the main pool pump. Unit
offers Summer, Winter, Auto and Custom modes.
Summer mode pumps 4 hours in the morning, 4 hours in the afternoon.
Winter mode pumps 4 hours in the afternoon only.
Auto mode automatically changes to Winter mode on 15th May and returns
to Summer mode on 15th August. (15th November & 15th February
respectively for the Northern Hemisphere). These dates can be customised
by the user.
Custom mode allows user to enter 1 or 2 pumping cycles per day at times
of their choice.
|
Installer does not have to purchase and install
a separate pool timer. Just one power point is required. Saves
installation time & money.
Ensures controller only adds chemicals when the pump is actually
running.
Clock has battery back-up so no need to reset in case of power failure.
|
Inbuilt Peristaltic Dosing Pump |
Peristaltic pumps are far more reliable than solenoid valves. If a valve
on the suction side of a pump leaks when it supposed to be closed, that
whole drum of chemical will be dosed into the pool.
Peristaltic pumps have positive displacement, so injection can occur in
the return line, after the filter and any heating equipment.
The benefit of peristaltic pumps is therefore higher reliability and
longer life for other pool equipment.
|
Unit is calibrated and has most the common set-up defaults when it
leaves the factory. |
| Easy "Litres per Day' entry sets up correct
dosing amount. |
Installation is simplified. Just mount the
controller and tee piece, connect the probes and switch it on. The default
settings are suitable for pools between 50,000 and 100,000 Litres.
Saves time. Prevents errors. |
Single probe and chemical injection tee |
| The single probe mounting and chemical
injection assembly is made from a standard 50mm PVC Tee. Reduction bushes
are supplied in the kit for 40mm pipe installations. |
The installer saves time and money by breaking
into the return line at only one point. No special tools or drilling etc
are required. |
Fully waterproof enclosure. |
| The easyCHEM 110 has been independently tested
for conformance with IP25 weather resistance. The sensor connector
is IP65 (hose-proof). |
The easyCHEM 110 is suitable for outdoor use,
however a separate shelter is desirable.
The superior design of the 24VDC pump means the
entire unit runs cooler than other brands which use 240V AC pumps.
|
32 character alphanumeric display |
User-friendly text messages in simple English are provided for pump status, alarms, set-up messages etc. No obscure codes or flashing lights
which confuse most people.
The menu system makes it a breeze to change settings or check operation
of the unit.
|
Full function keypad |
All day-to-day operations are directly accessed with a single keypad
button, simplifying operation. More complex set-up tasks are accessed via
a separate "Tech Menu" key. |
Super-Chlorinate Function (Chlorine version only) |
| Operator can enter how many litres of Chlorine
they wish to add.
The pool pump is always run for 4 hours when super chlorination is
complete, ensuring total mixing.
|
End-user or pool service professional does not
need to handle liquid chemicals for super-chlorination. The easyCHEM 110
handles it for you, and returns to normal feeding operation afterwards. |
Pool Backwashing Function |
| The easyCHEM 110 prompts the user to set the
filter control to Backwash, Rinse and Normal Filtration as required. The
pool pump is switched off whenever the filter control is being changed.
Chemical addition is disabled while backwashing.
|
Makes backwashing simple for home users,
helping to ensure clean, hygienic water. |
Pump to Waste Function |
| The easyCHEM 110 prompts the user to set the
filter control to "Pump to Waste" and Normal Filtration as
required. The pool pump is switched off whenever the filter control is
being changed.
Chemical addition is disabled while pumping to waste.
|
Makes draining the pool simple for home users.
Normally only used after periods of heavy rain. |
Service/Calibration Interval Message |
| Displays a friendly message at factory-set
intervals, informing the user that it's time to check and lubricate the pump
tube (annually). |
Ensures that the unit is regularly maintained, providing for the best possible accuracy and pool water
quality. |
Specifications
|
|
Temperature
Range
: -10.0 to 120.0 OC
Resolution : 0.1 OC
Accuracy : +/-0.2 OC
Calibration
Automatic calibration against
reference thermometer. Unit is pre-calibrated at the factory and only
needs to be re-calibrated if the temperature sensor is replaced.
Enclosure
Tough ABS enclosure tested to
IP24. Temperature sensor connector is rated to IP65.
Display
32 Character alphanumeric LCD
with user-friendly menu system and full-text messages.
Dimensions
265 x 185 x 130 mm (controller
only) |
Mass
Instrument only : Approx 1 kg
Full Kit : Approx 3 kg
Environment
Temperature : 0 to 45 OC
Humidity : 0
to 95% R.H.
Peristaltic Pumps
| 1 x built-in Peristaltic
Pump.
1.8L/Hr with small tube
6.1L/hr with large tube |
| Chemical resistant
Santoprene
pump tubing |
Calendar Clock
24 Hour Calendar Clock.
Battery back-up in case of
power failure will last for >10 years.
Power
220/240V AC, 5 watts max for
controller.
Can be factory-set for 110/120
V AC
|
Ordering Information
|
Part No
easyCHEM 110
(Chlorine).....117111
easyCHEM 110 (Acid).........117112Kit Includes
Temperature Sensor,
2m......124230
Sensor/Injection
Tee........117905
50 to 40mm Bushes x
2.......NPBR5040
Pump Input/Output Tube, 4m..116360
Drum Lid + tube
fitting.....116362
Tube weight for drum........116354
easyCHEM 110
Handbook.......130050
No other items are required to
install and operate the easyCHEM 110.
|
Part No
Spares
Pump Tube assembly,
1.8L/Hr.116353
Pump Tube assembly,
6.1L/Hr.116352
Pump Tube Lubricant,
3mL....130103 |
Download this Specification Sheet in PDF format.