Nothing's as cool, as a freshwater
pool™
easyCHEM 100 Chemical Feeder
for Pools and Spas
|
|
Full Size Image
Illustration of Typical Full
Installation
The ideal alternative to salt water chlorinators for those people
who prefer to swim in a fresh water pool.
|
 | Proportional feeder for
Chlorine, Acid or other chemicals.
|
| Pump rate can be set
from 1 to 99 to fine-tune dose rate. Set to "00" to switch
off, and "On" to pump continuously.
|
| Highly reliable
peristaltic pump.
|
| Piggy-back plug for
pool pump, ensures feeder only operates when pool pump is on.
|
| Supplied with all accessories required for installation
and operation.
|
| Fast and easy to
install.
|
| Water resistant to IP65
design.
|
| Easy to use.
|
| Designed for domestic
and small commercial pool installations.
|
| To see how quick and
easy the easyCHEM 100 is to install, ask for a copy of the
installation guide. |
|
|
|
Features
|
Benefits
|
| Simple
to Operate |
| Single dial to set dose rate |
Nothing could be simpler. Just set the unit to
dose Chlorine or Acid at a pre-set rate to maintain the level in the
pool.
Check your pool regularly with a test kit, and adjust the dose-rate
accordingly. |
|
Alternative to Salt Chlorinator |
The easyCHEM 100 is an excellent alternative to salt
chlorinators. It adds the same amount of Chlorine every day, depending on
the number of hours for which the pool pump operates.
Unlike salt chlorinators, the easyCHEM has much more
capacity to add more Chlorine during sustained hot weather or with higher
bather loads. Your family's health is our priority.
The easyCHEM 100 is virtually maintenance free. There are
no expensive electrodes to clean or replace.
And of course, there's no salt ! So your pool will be as
fresh as a mountain lake. |
Inbuilt Peristaltic Dosing Pump |
Peristaltic pumps are far more reliable than solenoid valves. If a valve
on the suction side of a pump leaks when it supposed to be closed, that
whole drum of chemical will be dosed into the pool.
Peristaltic pump have positive displacement, so injection can occur in
the return line, after the filter and any heating equipment.
The benefit of peristaltic pumps is therefore higher reliability and
longer life for other pool equipment.
|
Easy-to-install injection tee |
| The chemical
injection assembly is made from a standard 50mm PVC Tee. Reduction bushes
are supplied in the kit for 40mm pipe installations. |
The installer saves time and money by fitting a
standard plumbing tee piece. No special tools or drilling etc
are required. |
Fully waterproof enclosure. |
| The easyCHEM 100 enclosure is waterproof to
IP65 (hose-proof). |
The easyCHEM 100 is suitable for outdoor use,
however a separate shelter is desirable.
The superior design of the 24VDC pumps means the
entire unit runs cooler than other brands which use 240V AC pumps.
|
LED display |
The bright LED display as big 12.7mm digits.
Set the display from 1 to 99 to fine-tune the dose rate to your exact
requirements.
Set the display to "00" to turn dosing off.
Set the display the "On" for continuous dosing, such as
super-chlorination. |
Specifications
|
Pump Flow
Rate
The easyCHEM 100 has three dose
rate settings (normally pre-set in the factory). There is a choice of 2
sizes of pump squeeze tube, which changes the flow rate. There are also 2
motor speeds available.
These combinations are set
up in the factory according to the customer's requirements prior to
despatch. The dose rate setting and tube size can easily be changed in the
field.
| Setting/Tube
Size |
mL/Hr |
mL/Day* |
| Standard
40rpm Motor |
| Low,
small tube |
0
- 150 |
0
- 1200 |
| Medium,
small tube |
0
- 300 |
0
- 2400 |
| High,
small tube |
0
- 600 |
0
- 4800 |
| Low,
large tube |
0
- 500 |
0
- 4000 |
| Medium,
large tube |
0
- 1000 |
0
- 8000 |
| High,
large tube |
0
- 2000 |
0
- 16000 |
| Optional
120rpm Motor |
| Low,
large tube |
0
- 1500 |
0
- 12000 |
| Medium,
large tube |
0
- 3000 |
0
- 24000 |
| High,
large tube |
0
- 6000 |
0
- 48000 |
*Calculated for 8 hours per
day pool
pump operation.
Highlighted
row is setting for standard Chlorine unit.
(Note that flow rates are
approximate and will vary slightly from unit to unit.)
|
Enclosure
Tough ABS enclosure, fully
waterproof to IP65.
Display
2 x 12.7mm high digits
Dimensions
200 x 120 x 75 mm
Mass
Instrument only : Approx 500 g
Full Kit : Approx 1.5 kg
Environment
Temperature : 0 to 45 OC
Humidity : 0
to 95% R.H.
Peristaltic Pump
| Built-in Peristaltic
Pump.
|
| Chemical resistant
Santoprene
pump tubing |
Power
220/240V AC, 5 watts max for
controller.
Can be factory-set for 110/120
V AC
|
Ordering Information
|
Part No
easyCHEM 100 for Chlorine...117101
easyCHEM 100 for Acid.......117102Kit Includes
Injection
Tee...............117901
50 to 40mm Bushes x
2.......NPBR5040
Pump Input/Output Tube, 4m..116360
Drum Lid tube fitting.......116362
Tube weight for drum........116354
easyCHEM 100
Handbook.......130050
No other items are required to
install and operate the easyCHEM 100.
|
Part No
Spares
Small Pump Tube assembly....116353
Large Pump Tube assembly....116352
Pump Tube Lubricant,
3mL....130103 |
Download this Specification Sheet in PDF format.