proCHEM-DI Sugar Moisture Controller
with Dual Set Points
|
|
Full Size Picture |
 | Enclosure Waterproof to IP65
|
| Dual Set Point Control Relays
|
| Easy to Install
|
| Easy to Use
|
| 4-20mA and 0-1 V DC Outputs
|
| Australian Made |
|
| Designed
specifically for measuring the moisture of sugar on conveyor systems by
measuring Conductivity and reporting the result in % D.I. (Dilution Indicator)
units. |
| The NEW proCHEM
Series controllers provide an economical answer to most process
monitoring, control or recording requirements.
Dual Set Points are provided. The default setup for these are as
"Too High" and "Too Low" control points. The
user can also re-set them so that they are both "Too High" or
both "Too Low" control points. An example of this type of setup
is where the proCHEM unit has one point set to control the
process, and a second point beyond that set to activate an alarm.
Separate LED's indicate when either of the Set Points has been
exceeded. The output relays are rated to 240V and are fused at 2 Amps.
Higher currents can be switched with an external contactor.
All proCHEM units are easy to install. They are housed in
a rugged plastic case which is non corrosive, waterproof and dustproof to
IP65. All controls can be accessed via the hinged, clear cover. The large
LCD display is easy to read, even from a distance. |
The proCHEM series
is designed for maximum flexibility. 4 to 20 mA and
0 to 1 V DC outputs are provided as standard.
For even greater output flexibility, ask about the 420 ToolBox.
This module provides such features as reversing the current or voltage
signal, and optional extra control relay, RS232 interface or pulsed
output. The is 420 ToolBox is essential if the current or
voltage output is to be isolated.
The proCHEM series is proudly designed and manufactured
in Australia. The TPS Quality System has been certified in accordance with
AS/NZS ISO9001 standards. Since 1968, TPS has built a reputation for
excellent backup service that is second to none. |
Specifications
|
Range
0 to 50.0 D.I.
Resolution
0.1 D.I.
Accuracy
+/-0.1 D.I.
Ambient Drift
<0.1 D.I. per 10OC
change
Long Term Drift
<0.1% per year
Temperature Compensation
Automatic, 0 to 100 OC
Common Mode Rejection
120dB |
Enclosure
Polycarbonate, waterproof to
IP65
Display
12.5mm LCD
Outputs
Current : 4 to 20 mA
Voltage : 0 to 1 V DC
Contacts : Two relays with changeover
contacts.
Rated to
240V, 1 Amp
Isolation
Galvanic isolation of sensor
input
Current and voltage outputs
are not
isolated
Power
220/240 V AC, 50/60Hz, 2VA
12V DC power optional.
Dimensions
215 x 190 x 115 mm
Mass
Instrument only : Approx 900g
Full Kit
: Approx 1.5kg
Instrument Operating Environment
Temperature : 0 to 45 OC
Humidity : 0
to 95% R.H. |
Ordering Information
|
Part No
proCHEM-DI Controller.......112128
Kit Includes
proCHEM-DI
Handbook.........130050
Sensor and Cable
Sugar Moisture
Sensor.......112204
(no cable)
5m detachable cable to suit.130047 |
Part No
Options
Extended cable..............130040
(order by the metre)
12V DC Power
option.........130072
Remote, 2-wire 4-20mA
Loop..130080
Powered LCD Display
|
|
|
Download this Specification Sheet in PDF format.
Download the full
colour proCHEM Series Brochure (433 KB PDF).
Download the handbook for this instrument.
Hint : Right click on a link, then
select "Save Target As..." or "Save Link
As..." to save the file to your own computer.
If you do not have Adobe Acrobat in your computer, a free Acrobat
Reader can be downloaded by clicking on the following link.
|
TPS
reserves the right to change any part of this specification without
notice.
Version 1.0
Copyright © 2003 T.P.S. Pty Ltd |
