Aqua-DP
Waterproof Dissolved Oxygen - pH -mV
Temperature Meter
|
Full Size Image |
 | Dual readout of Dissolved Oxygen
and pH/mV
|
| Waterproof to IP65
|
| Easy to use
|
| One-touch calibration
|
| Full-text prompting and error
messages
|
| Large digit mode
|
| Fold-out stand for bench use
|
| Australian Made |
|
| The Aqua-DP is a waterproof,
easy-to-use, Dissolved Oxygen, pH/mV and Temperature meter. It provides
accurate, reliable measurements, and is very easy to use.
Genuine one-touch calibration puts an end to time-consuming
calibration procedures.
Rugged and Reliable
TPS has used the latest microprocessor electronics to totally eliminate
all internal and external adjustments. The result is a dramatic increase
in reliability. The unit is ideal for field or factory use.
The Dissolved Oxygen and pH sensors are designed for maximum durability
in field and factory environments.
24 Character Alphanumeric Display
The two-line, 24 character display shows the Dissolved Oxygen
plus pH readings simultaneously. Alternatively, a Large Digit mode is available.
This shows one reading at a time at almost double the size. To simply
use of the Aqua-DP, plain English prompts and error messages are
provided. There are no codes to interpret like some other brands.
One-touch Calibration
Calibration of the Aqua-DP could not be simpler.
Just place the sensor into the relevant standard and press the
Calibrate key. That's all there is to it !
The Aqua-DP displays sensor condition after calibration has
been completed, allowing for preventative maintenance.
All calibration information is stored in memory when the Aqua-DP
is switched off, even if the battery is removed. |
Salinity Correction
Salinity correction for ppM Dissolved Oxygen readings is a breeze. Simply
enter the Salinity value and the Aqua-DP does the rest !
Low Battery Drain
The Aqua-DP will provide in excess of 70 hours of continuous use
with an alkaline 9 volt battery.
A handy battery-saver function switches the Aqua-DP off
after 5 minutes if no keys have been pressed. This function can
also be disabled for continuous operation.
Temperature Compensation
Correct temperature compensation is vital for accurate Dissolved
Oxygen measurements. The Aqua-DP compensates for membrane
permeability for all readings and also for Dissolved Oxygen solubility in
ppM mode.
Temperature compensation for pH probe performance is also fully
automatic.
Australian Quality
The Aqua Series is proudly designed and manufactured in Australia.
Our aim is to provide you with the best quality, service and
value for money. The TPS Quality System has been certified in
accordance with the AS/NZS ISO 9001 standard. Since 1968, TPS has
built a reputation for excellent backup service that is second
to none. |
Specifications
|
ppM
(mg/L)
Range
: 0 to 25.0 ppM
Resolution : 0.1 ppM
Accuracy : +/-0.1
ppM
% Saturation
Range
: 0 to 250.0 %Sat'n
Resolution : 0.1 %Sat'n
Accuracy : +/-0.3 %Sat'n
pH
Range
: 0 to 14.00 pH
Resolution : 0.01 pH
Accuracy :
+/-0.01pH
mV
Range
: 0 to +/-999mV
Resolution : 1mV
Accuracy : +/-1mV
Temperature
Range
: -10.0 to 120.0 OC
(sensor limit 50 OC)
Resolution : 0.1 OC
Accuracy : +/-0.2 OC
Salinity Correction
User-set, from 0 to 50.0 ppK
NaCl
Oxygen Calibration
Automatic one-touch calibration
in Zero solution and in Air
pH Calibration
Automatic one-touch calibration
in 4.00, 6.88, 7.00,
9.23 or 10.06 pH buffers.
Temperature Calibration
Automatic calibration against
reference thermometer |
Temp
Sensor Offset Range
-10.0 to +10.0 oC
Temperature Compensation
Oxygen
Dual automatic system for :
1. Membrane permeability
2. Solubility compensation in
ppM mode
pH
Automatic, 0 to 100 OC.
Enclosure
Tough, ABS plastic case,
waterproof to IP65
Display
24 Character alphanumeric LCD with
full-text prompts and error messages.
Battery Saver Function
On : Automatically
switches
off after 5 minutes of
no use.
Off : Unit remains on for
continuous use.
Power
9V Alkaline battery for 100+ hours.
Dimensions
157 x 78 x 35 mm
Mass
Instrument only : Approx 250g
Full Kit
: Approx 1.5kg
Environment
Temperature : 0 to 45 OC
Humidity : 0
to 90% R.H. |
Ordering Information
|
Part No
Aqua-DP.................123152
Kit Includes...
pH6.88 Buffer, 200mL....121306
pH4.00 Buffer, 200mL....121381
9V Alkaline Battery ....130026
Aqua-DP Handbook........130050
Sensors ordered separately...
ED1 Sensor (no cable)...123400
3m cable for ED1........123230
5m cable for ED1........123232
Combination pH Probe,1m.121207
Submersible pH Probe,5m.111224 ORP
Sensor plastic,1m...121262
Extended cable / mtr....130040 |
Part No
Optional DO2 Sensors...
YSI BOD Bottle Sensor...123214
Self-Stirring YSI BOD
Bottle Sensor...........123213
Other Options...
Aluminium Carry Case....130057
Spares...
Membrane, Filling Solution
& Zero Calibration
kit..123301
Sodium Sulphite for Zero
Calibration, 50g........123302
Filling Solution, 45mL..123303
Probe protector.........123202
|
TPS reserves the right to change any part of this
specification without notice.
Version 1.0
Copyright © 2002 T.P.S. Pty Ltd |
Download this Specification Sheet in PDF format.